Gtco Summagrid IV - Users Guide Part 2 Manuel d'utilisateur télécharger pdf (Page 12)

Summagrid IV 12

1.13.3 Command Syntax

Activate the annunciator for

approximately one quarter of a second;

emits last tone chosen.

Selects one of four different tones for

the annunciator and sounds that tone.

<ESC>A

<ESC>Y(n)

n=1 low tone

n=2 medium tone

n=3 high tone

n=4 highest tone

NOTE: If you want to hear a tone every time a switch is selected, be certain that DIP switch

C5 is in the ON position and use the following command:

Enable Audible Feedback <ESC>MT1

Disable Audible Feedback <ESC>MT0

1.14 Relocate Origin Command

1.14.1 Description

This command allows the user to relocate the tablet origin (0,0). The default origin

location is the lower left-hand corner of the tablet active area. The user may move

the origin to either one of four pre-defined locations or to a user-defined position

anywhere within the tablet active area. The pre-defined locations are listed as

follows:

 Center of Tablet

 Lower Right Corner

 Lower Left Corner

 Upper Left Corner

 Upper Right Corner

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Pas de commentaire

Gtco Summagrid IV - Users Guide Part 2 Manuel d'utilisateur Page 12